Standard Series (DIN 3015-1)

Product poster illustrating the full range of pipe, tube and hose clamps according to DIN 3015

Click here to download or request your personal copy - free of charge, non-binding and without any further obligations for you.

Detailbild (copy 1)

Installation of Pipes, Tubes and Components

▪ Clamp bodies with profiled inside surface and tension clearance
▪ To be used as fixed point clamp preventing the line from sliding
▪ Clearance between the clamp halves provides tension of the tube or pipe
▪ Vibration/noise reducing and impact absorbing effect towards the direction
  of the line provided by the grooves on the inside

(copy 3)

Polypropylene (PP)

(copy 5)

Polyamide (PA)

(copy 3)

Elastomer (SA)

(copy 5)

Aluminium (AL)

Installation of Hoses and Cables

▪ Clamp bodies with smooth inside surface without tension clearance
▪ Smooth inside surface and chamfered edges avoid damaging of the hose or cable
▪ To be used as guide allowing the line to slide
▪ Choose the internal diameter of the clamp body slightly smaller than the outside diameter
  of the hose or cable to use it as fixed point clamp preventing the line from sliding

(copy 4)

Polypropylene (PPH)

(copy 1)

Polyamide (PAH)

(copy 4)

Elastomer (SAH)

Installation of Pipes, Tubes and Cables

▪ Clamp bodies with individual elastomer inserts
▪ Vibration/noise reducing installation of pipes and tubes
▪ Most effective reduction of vibration and noise
▪ Extra-gentle installation of hoses or cables

(copy 3)

Polypropylene (PPR)

(copy 4)

Polyamide (PAR)

(copy 5)

Elastomer (RI)

Installation of Hoses

▪ Only one clamp body required for two different hose diameters
▪ Rotate upper clamp half by 180° in order to reduce the diameter
▪ Available for 3 different diamater combinations of standard hoses and compact hoses 

(copy 5)


(copy 6)


Installation of Proximity Switches 

▪ Installation of proximity switches according to DIN EN 60947-5-2 or similar (rectangular construction)
▪ Recommended to be used with Hexagon Rail Nut SM and Mounting Rail TS to provide axial and horizontal position adjustment

(copy 2)

Polypropylene (PP-VK)

(copy 2)

Polyamide (PA-VK)

(copy 7)

Installation of Conduit Hoses

▪ Design of the inside surface of the clamp body prevents corrugated conduit hoses from sliding
▪ Chamfered edges avoid damaging of the conduit hoses ƒƒ
▪ Available for all commonly used nominal sizes ƒƒ
▪ Excellent weathering resistance, even under extreme conditions